Section	Price
1. NO LONGER AVAILABLE N.M.L. out of stock today	Price on request
2. STUD BM 8X28 999.062.009.02 out of stock today	€11.04
3. TENSION PIN 12X16 FOR FRONT DIFFERENTIAL 964 C4 900.197.057.01 out of stock today	€5.62
4. OIL DRAIN SCREW G-50 BOX 999.063.008.02 out of stock today	€17.52
5. GASKET OIL DRAIN PLUG 65-98 N.013.827.2 in stock	€0.29
6. FRONT AXLE DIFFERENTIAL BLOW-OFF CAP 964 C4 964.337.304.01 out of stock today	€2.68
7. OIL LEVEL SCREW G-50 900.219.001.30 out of stock today	€13.01
8. NO LONGER AVAILABLE N.M.L. out of stock today	Price on request
9. O-RING 186X3.5 GEARBOX COVER 911 87-98 999.701.745.40 out of stock today	€6.12
10. WASHER 900.025.007.02 out of stock today	€2.30
11. HEX NUT 900.076.025.02 in stock	€0.27
12a. 0.1 MM SPACER FOR THE INSIDE OF THE INCOMING SHAFT OF THE FRONT DIFFERENTIAL, 964 C4 959.349.310.00 out of stock today	€5.81
12b. 0.15 MM RING BEARING, INSIDE SIDE OF INCOMING SHAFT, FRONT DIFFERENTIAL, 964 C4 959.349.310.01 out of stock today	€5.81
12c. 0.20 MM RING GASKET, INSIDE OF INCOMING SHAFT, FRONT DIFFERENTIAL, 964 C4 959.349.310.02 out of stock today	€8.63
12d. 0.25 MM RING BEARING, INNER SIDE, INCOMING SHAFT OF FRONT DIFFERENTIAL, 964 C4 959.349.310.03 out of stock today	€53.51
12e. 0.30 MM SPACER FOR THE INSIDE OF THE INCOMING SHAFT OF THE FRONT DIFFERENTIAL, 964 C4 959.349.310.04 out of stock today	€53.56
12f. 1.00 MM SPACER, INSIDE OF INCOMING SHAFT, FRONT DIFFERENTIAL, 964 C4 959.349.310.07 out of stock today	€5.81
12g. 1.30 MM RING BEARING, INNER SIDE, INPUT SHAFT OF FRONT DIFFERENTIAL, 964 C4 959.349.310.08 out of stock today	€5.81
13. THREE-PIECE BEARING 34.925 MM INNER SIDE, INCOMING SHAFT OF FRONT DIFFERENTIAL 964 C4 999.059.086.00 out of stock today	€86.14
14. SPACER BETWEEN BEARINGS, INNER SIDE OF INCOMING SHAFT, FRONT DIFFERENTIAL, 964 C4 964.349.312.00 out of stock today	€12.52
15a. 0.15 MM SPACER FOR THE OUTER SIDE OF THE INCOMING SHAFT OF THE FRONT AXLE DIFFERENTIAL, 964 C4 964.349.311.00 out of stock today	€10.72
15b. RING BEARING 0.20 MM OUTER DIAMETER, INCOMING SHAFT OF FRONT AXLE DIFFERENTIAL, 964 C4 964.349.311.01 out of stock today	€8.72
15c. RING BEARING 0.30 MM (OUTSIDE DIAMETER) FOR INCOMING SHAFT OF FRONT DIFFERENTIAL, 964 C4 964.349.311.03 out of stock today	€8.80
15d. RING BEARING 0.40 MM OUTER DIAMETER, INCOMING SHAFT OF FRONT AXLE DIFFERENTIAL, 964 C4 964.349.311.04 out of stock today	€8.80
15e. RING BEARING 0.60 MM OUTER DIAMETER, INCOMING SHAFT OF FRONT DIFFERENTIAL, 964 C4 964.349.311.05 out of stock today	€8.80
15f. 1.00 MM O-RING FOR THE OUTER SIDE OF THE INCOMING SHAFT OF THE FRONT DIFFERENTIAL, 964 C4 964.349.311.06 out of stock today	€10.72
15g. 2.00 MM RING BEARING, OUTER SIDE, INCOMING SHAFT OF FRONT DIFFERENTIAL, 964 C4 964.349.311.08 out of stock today	€10.72
16. HEX NUT M33X1.5 BETWEEN THE ADJUSTMENT RING AND THE SEAL RING ON THE INCOMING SHAFT OF THE FRONT AXLE DIFFERENTIAL, 964 C4 999.084.077.00 out of stock today	€23.34
17. M5x8 Allen Screw on Hex Nut, Input Shaft of Front Differential, 964 C4 900.119.022.02 out of stock today	€0.90
18. SIDE COVER OIL SEAL 87-98 999.113.347.40 in stock	€14.69
19. 33.338 MM THERMAL BEARING, INPUT SHAFT FOR 964 C4 DIFFERENTIAL 999.059.096.00 out of stock today	€125.94
20. OIL SEAL CENTRAL DRIVESHAFT C-4 999.113.352.40 out of stock today	€15.91

Compatible models

PORSCHE 964 CARRERA 4 3.6 1989 - COUPE
PORSCHE 964 CARRERA 4 3.6 1990 - CABRIOLET
PORSCHE 964 CARRERA 4 3.6 1990 - COUPE
PORSCHE 964 CARRERA 4 3.6 1990 - TARGA
PORSCHE 964 CARRERA 4 3.6 1991 - CABRIOLET
PORSCHE 964 CARRERA 4 3.6 1991 - COUPE
PORSCHE 964 CARRERA 4 3.6 1991 - TARGA
PORSCHE 964 CARRERA 4 3.6 1992 - CABRIOLET
PORSCHE 964 CARRERA 4 3.6 1992 - COUPE
PORSCHE 964 CARRERA 4 3.6 1992 - TARGA
PORSCHE 964 CARRERA 4 3.6 1993 - CABRIOLET
PORSCHE 964 CARRERA 4 3.6 1993 - COUPE
PORSCHE 964 CARRERA 4 3.6 1993 - TARGA

Show more models Show less models

Your cart

Europe

Front Differential Housing 964 Carrera 4

NO LONGER AVAILABLE

STUD BM 8X28

OIL DRAIN SCREW G-50 BOX

GASKET OIL DRAIN PLUG 65-98

OIL LEVEL SCREW G-50

NO LONGER AVAILABLE

O-RING 186X3.5 GEARBOX COVER 911 87-98

WASHER

HEX NUT

SIDE COVER OIL SEAL 87-98

OIL SEAL CENTRAL DRIVESHAFT C-4

TENSION PIN 12X16 FOR FRONT DIFFERENTIAL 964 C4

FRONT AXLE DIFFERENTIAL BLOW-OFF CAP 964 C4

1.30 MM RING BEARING, INNER SIDE, INPUT SHAFT OF FRONT DIFFERENTIAL, 964 C4

1.00 MM SPACER, INSIDE OF INCOMING SHAFT, FRONT DIFFERENTIAL, 964 C4

0.30 MM SPACER FOR THE INSIDE OF THE INCOMING SHAFT OF THE FRONT DIFFERENTIAL, 964 C4

0.25 MM RING BEARING, INNER SIDE, INCOMING SHAFT OF FRONT DIFFERENTIAL, 964 C4

0.20 MM RING GASKET, INSIDE OF INCOMING SHAFT, FRONT DIFFERENTIAL, 964 C4

0.15 MM RING BEARING, INSIDE SIDE OF INCOMING SHAFT, FRONT DIFFERENTIAL, 964 C4

0.1 MM SPACER FOR THE INSIDE OF THE INCOMING SHAFT OF THE FRONT DIFFERENTIAL, 964 C4

THREE-PIECE BEARING 34.925 MM INNER SIDE, INCOMING SHAFT OF FRONT DIFFERENTIAL 964 C4

SPACER BETWEEN BEARINGS, INNER SIDE OF INCOMING SHAFT, FRONT DIFFERENTIAL, 964 C4

2.00 MM RING BEARING, OUTER SIDE, INCOMING SHAFT OF FRONT DIFFERENTIAL, 964 C4

1.00 MM O-RING FOR THE OUTER SIDE OF THE INCOMING SHAFT OF THE FRONT DIFFERENTIAL, 964 C4

RING BEARING 0.60 MM OUTER DIAMETER, INCOMING SHAFT OF FRONT DIFFERENTIAL, 964 C4

RING BEARING 0.40 MM OUTER DIAMETER, INCOMING SHAFT OF FRONT AXLE DIFFERENTIAL, 964 C4

RING BEARING 0.30 MM (OUTSIDE DIAMETER) FOR INCOMING SHAFT OF FRONT DIFFERENTIAL, 964 C4

RING BEARING 0.20 MM OUTER DIAMETER, INCOMING SHAFT OF FRONT AXLE DIFFERENTIAL, 964 C4

0.15 MM SPACER FOR THE OUTER SIDE OF THE INCOMING SHAFT OF THE FRONT AXLE DIFFERENTIAL, 964 C4

HEX NUT M33X1.5 BETWEEN THE ADJUSTMENT RING AND THE SEAL RING ON THE INCOMING SHAFT OF THE FRONT AXLE DIFFERENTIAL, 964 C4

M5x8 Allen Screw on Hex Nut, Input Shaft of Front Differential, 964 C4

33.338 MM THERMAL BEARING, INPUT SHAFT FOR 964 C4 DIFFERENTIAL

Front Differential Housing 964 Carrera 4

1. NO LONGER AVAILABLE

2. STUD BM 8X28

3. TENSION PIN 12X16 FOR FRONT DIFFERENTIAL 964 C4

4. OIL DRAIN SCREW G-50 BOX

5. GASKET OIL DRAIN PLUG 65-98

6. FRONT AXLE DIFFERENTIAL BLOW-OFF CAP 964 C4

7. OIL LEVEL SCREW G-50

8. NO LONGER AVAILABLE

9. O-RING 186X3.5 GEARBOX COVER 911 87-98

10. WASHER

11. HEX NUT

12a. 0.1 MM SPACER FOR THE INSIDE OF THE INCOMING SHAFT OF THE FRONT DIFFERENTIAL, 964 C4

12b. 0.15 MM RING BEARING, INSIDE SIDE OF INCOMING SHAFT, FRONT DIFFERENTIAL, 964 C4

12c. 0.20 MM RING GASKET, INSIDE OF INCOMING SHAFT, FRONT DIFFERENTIAL, 964 C4

12d. 0.25 MM RING BEARING, INNER SIDE, INCOMING SHAFT OF FRONT DIFFERENTIAL, 964 C4

12e. 0.30 MM SPACER FOR THE INSIDE OF THE INCOMING SHAFT OF THE FRONT DIFFERENTIAL, 964 C4

12f. 1.00 MM SPACER, INSIDE OF INCOMING SHAFT, FRONT DIFFERENTIAL, 964 C4

12g. 1.30 MM RING BEARING, INNER SIDE, INPUT SHAFT OF FRONT DIFFERENTIAL, 964 C4

13. THREE-PIECE BEARING 34.925 MM INNER SIDE, INCOMING SHAFT OF FRONT DIFFERENTIAL 964 C4

14. SPACER BETWEEN BEARINGS, INNER SIDE OF INCOMING SHAFT, FRONT DIFFERENTIAL, 964 C4

15a. 0.15 MM SPACER FOR THE OUTER SIDE OF THE INCOMING SHAFT OF THE FRONT AXLE DIFFERENTIAL, 964 C4

15b. RING BEARING 0.20 MM OUTER DIAMETER, INCOMING SHAFT OF FRONT AXLE DIFFERENTIAL, 964 C4

15c. RING BEARING 0.30 MM (OUTSIDE DIAMETER) FOR INCOMING SHAFT OF FRONT DIFFERENTIAL, 964 C4

15d. RING BEARING 0.40 MM OUTER DIAMETER, INCOMING SHAFT OF FRONT AXLE DIFFERENTIAL, 964 C4

15e. RING BEARING 0.60 MM OUTER DIAMETER, INCOMING SHAFT OF FRONT DIFFERENTIAL, 964 C4

15f. 1.00 MM O-RING FOR THE OUTER SIDE OF THE INCOMING SHAFT OF THE FRONT DIFFERENTIAL, 964 C4

15g. 2.00 MM RING BEARING, OUTER SIDE, INCOMING SHAFT OF FRONT DIFFERENTIAL, 964 C4

16. HEX NUT M33X1.5 BETWEEN THE ADJUSTMENT RING AND THE SEAL RING ON THE INCOMING SHAFT OF THE FRONT AXLE DIFFERENTIAL, 964 C4

17. M5x8 Allen Screw on Hex Nut, Input Shaft of Front Differential, 964 C4

18. SIDE COVER OIL SEAL 87-98

19. 33.338 MM THERMAL BEARING, INPUT SHAFT FOR 964 C4 DIFFERENTIAL

20. OIL SEAL CENTRAL DRIVESHAFT C-4

Compatible models